Slewing Rings/PRIUS BEARINGS/A14-22E1B1← View all models

PRIUS BEARINGS · SLEWING RING BEARING

A14-22E1B1
slewing ring bearing

Review the dimensional reference and engineering data for this slewing ring bearing model. Send your application, load and mounting requirements to receive a quotation.

Request a quote →Browse all models ↗
PRIUS alternative supply2D section referenceRFQ engineering review
PRIUS BEARINGS A14-22E1B1 external gear slewing ring bearingEXTERNAL GEAR / A14-22E1B1

DIMENSIONAL REFERENCE

MODEL A14-22E1B1
PRIUS BEARINGS A14-22E1B1 2D section drawing

Use the drawing together with the engineering data table when checking fit, mounting and replacement requirements.

ENGINEERING DATA

A14-22E1B1
parameters

Key dimensions and load information for preliminary selection.

ModelA14-22E1B1
Brand / alternativePRIUS BEARINGS · Alternative for Rotek
TypeSlewing ring bearing
Outside diameter OD (in)28.400
Inside diameter ID (in)17.13
Overall height HT (in)3.44
Weight (lb)319
Nominal thrust capacity (lb)461000
Nominal moment capacity (ft-lb)194000
Gear pitch diameter PD (in)28.000
Diametral pitch DP4
Gear tooth count112
Tangential tooth load F (lb)14500
Outer mounting hole count18
Inner mounting hole count24
Confirm dimensions & request a quote →

NEED A MATCH?

Send us your
drawing or load case.

We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.

Start an enquiry →

MODEL SELECTION

Related slewing
ring bearings

Compare nearby model references or send us your current bearing number for a dimensional cross-check.

Schaeffler · Slewing ring bearingVLA 20 0414 NView dimensions and engineering data →Schaeffler · Slewing ring bearingVLA 20 0544 NView dimensions and engineering data →Schaeffler · Slewing ring bearingVLA 20 0644 NView dimensions and engineering data →Schaeffler · Slewing ring bearingVLA 20 0744 NView dimensions and engineering data →

FREQUENT QUESTIONS

Can PRIUS BEARINGS supply this slewing ring bearing model?

We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.

What information is needed for selection?

Please provide the bearing model, outside and inside dimensions, height, gear configuration, mounting-hole details, loads and operating speed.

Can you check an alternative from a drawing or sample?

Yes. Upload a drawing, catalogue page or clear photos and our team can check the fit before quotation.